12V 91.6A C7JTF PSU power supply 12V 91.6A for POWER SUPPLY HOTSWAP 1100W FOR DELL POWEREDGE SERVER R620 R520 R720 C7JTF Y1MGX DC

Door Batterus123 gepubliceerd op Tuesday 24 September 05:47

Maximum transmission power supply replacement - DELL C7JTF pc power supply 12V 91.6A. C7JTF power supplies are compatible with POWER SUPPLY HOTSWAP 1100W FOR DELL POWEREDGE SERVER R620 R520 R720 C7JTF Y1MGX DC. Shopping C7JTF pc power online, more discount and money-saving. Check your DELL output power and voltage(Ref 80Plus) before you order C7JTF pc PSU service. Cost-effective computer power supply charging replacement, please visit www.batteryclub.org for more information.

GSB360-1.jpg
  • Brand : DELL power supply
  •  
  • Input Voltage : DC 32A
  • Ouput Volatge : 12V 91.6A
    Is there no power supply model you find? Take it easy! Contact us fast with your e-mail for what PC power models your are looking for. 

     

    Email: info@batteryclub.org

  •  

C7JTF replacement model:

C7JTF Y1MGX

Compatiblet with POWER SUPPLY HOTSWAP 1100W FOR DELL POWEREDGE SERVER R620 R520 R720 C7JTF Y1MGX DC:

COMPATIBILITY: R620 R520 R720
SPECS: See bellow
INCLUDED: Hotswap RPS 1100W power supply DC ONLY (THIS IS NOT AN AC POWER SUPPLY)

 

https://www.batteryclub.org/Goods/DEL17151_SE-C7JTF-Dell-Adapter.html

 

 

How to maintain DELL C7JTF computer power supply

1. Remove the fan. Disconnect the main power supply first, and unplug the input and output cables on the back of the power supply. Next, unplug and connect all the accessories connected to the power supply, remove the fixing screws of the power supply box, and take out the power supply box. Observe the appearance of the power supply box, remove the screws reasonably and accurately, and remove the cover. When taking the cover, the wires should be pulled out according to the gap at the same time. Remove the four screws that secure the fan and remove the fan. You can not solder the two power cables temporarily.
2. Clean the dust. After separating the power supply board and the fan with cardboard, use a small brush or a damp cloth to wipe the dust and wipe it clean. It is also possible to use dust from the fan to blow fan blades and bearings.
3. Add lubricant. Peel off the sticker and use a needle-nose pliers to pick out the rubber seal. Find the motor bearing, add lubricant, and when you use the fan to move the fan, make the lubricant flow evenly along the bearing, then add a few drops. Pay attention to whether the fan of the ball bearing has two bearings. Don't neglect the oil feeding to the bearing on the wind side. The oil can't be placed on the main shaft only. Lubricating oils must use computer-specific lubricants or advanced lightweight sewing machine oils. Never use the lubricants used in automobiles. Finally, install the rubber sealing sheet and label it.

Here, we provide other products for your reference:

HBC BA225030 2100MAH 6V battery

HBC BA225030 1500mah 6V battery

HBC QD109300 24V ac adapter

HP PCG007 310W power supply 

Microsoft G3HTA001H 8030mAh/60.8Wh battery

Lenovo 45N1110 battery 24Wh 11.1V/11.4V

Huawei HB512627ECW battery 410MAH 3.82V

Lenovo L15D1P31 battery 4000mAh 3.8V

Huawei HB442528EBC battery 300MAH 3.8V

CRAFTSMAN CMCB6050 500mah/60V battery

Acer AS16B5J 5600mAh battery

Toshiba PA5173U-1BRS 5200mAh battery

Fujitsu FMVNBP212 2200mAh battery

 

other products

HP 504966-001 100-240V 50-60Hz 12V

LENOVO PC9051 100-240V``47--63HZ

HP 403777-001 100-240V~ /4A, 47Hz- 63Hz

Dell P3JW1 88-264V 220W 60/50Hz

Dell RM112 100 - 240V

DELL K350R 100-240V -12==/0.1A MAX

DELL H275P-01 100-127V~/6A +5V==/18A, +3.3V==/5A

FSP SPI400U4BB 100- 240V-8-4A,60-50Hz

Reacties (0) 

Voordat je kunt reageren moet je aangemeld zijn. Login of maak een gratis account aan.