Step by step guidelines for Canon MX490 Wireless Setup and Troubleshooting

Door Myalona gepubliceerd op Friday 05 February 06:30

IJ Start Canon MX490 Unboxing Setup

  • To begin with, check whether the shipment box of your Canon PIXMA MX490 printer has the producer's seal on it.
  • Open the bundling box and remove all the delivered parts from it.
  • Lift the Canon PIXMA MX490 printer from the container.
  • Guarantee that you don't uncover the Canon gadget to coordinate daylight.
  • Affirm whether all the pressing materials on your gadget are eliminated.
  • Add the power link to the Canon PIXMA MX490 printer and the divider outlet. Press the ON/OFF catch for fueling On the Canon gadget.
  • Load the tape with adequate white paper.
  • Introduce the sent fine cartridges into their individual spaces for finishing the arrangement interaction.

Canon MX490 Printer Install

First Time Setting Up Canon MX490 Setup

  • Before you start the arrangement system for the printer, affirm certain subtleties.
  • An appropriately setting up wireless switch is fundamental for the association. A remote switch is one that associates the organization gadgets in your home (PC, printer, etc) to the Internet on your home organization. You should guarantee that the organization is performing admirably with solid signs.
  • Your PC should be associated with the home organization for snappy and simple Setup.
  • You should guarantee that your printer is associated with the power source and is turned on. Its force light should be lit. >
  • You should Press the printer's Setup button. You can recognize it without any problem. It is a catch with the arrangement symbol on your printer.
  • Your printer's Setup Menu will open up. With the assistance of route keys, you should choose the Wireless LAN Setup.
  • Press the OK button.
  • Wireless LAN Setup dropbox will introduce different choices. You should choose the Other Setup.
  • Presently, press OK.
  • The Other Setup will give two strategies. You should pick the Cableless Setup and Press OK.
  • This delivers your Canon Pixma MX492 Printer prepared for wireless LAN association in the "Cableless arrangement" technique.
  • Type > ijsetup in your web program to open the necessary site.
  • It will show the Setup connect. You should tap on it to follow it.
  • The following window will be the Product Selection screen. Canon Pixma MX492 Printer should be composed in the container close to the top. Snap Go.
  • The next page prompts you to choose Your Region. You should determine it accurately.
  • The next screen will show up, in the wake of affirming your locale. This page will have a catch that says Download. Snap-on it. This will start the download.
  • It might request that you save the downloaded document. On the off chance that it does, you should make it a highlight save it securely on your PC.
  • Hang tight for the download to finish which may require a few minutes.
  • Double-tap the downloaded .dmg document, when the download is finished.
  • This will naturally start the Setup for you. Presently watch out for the screen and adhere to on-screen guidelines.
  • The next window will show the subtleties of your printer. You need to click Next on it if it shows the right subtleties.
  • The following window gives you choices for the association strategy. You should pick the Wireless Lan Connection.
  • The resulting screen will anticipate that you should pick the ideal Wireless Lan Connection Method. Select Connect through a remote switch.
  • Presently, you will get the printer accessible on the organization. Click Next.
  • Once more, you will be incited to choose the Setup method. You should choose the Cableless Setup choice. Snap Yes on the off chance that if the .NET Framework screen shows up.
  • Essentially click Next once you see a rundown of programming accessible for Installation.
  • This will begin the Installation interaction for your printer. It might take a couple of seconds. You are needed to adhere to any onscreen guidelines whenever provoked.
  • At the point when the Setup Completion window shows up, click the Complete catch.
  • Snap Next on the window that affirms the consummation of the Setup.
  • The Installer may take you to another case looking for consent for the Extended Survey Program. You can Agree or Disagree with it after perusing the subtleties dependent on your decision.
  • Test Print Window will be shown straight away. This test is rushed to check the printer's activity. You should stack plain paper to the printer. From that point, you need to click Execute on your PC screen. Snap Next. Rather than Execute, you can just snap Next if you need to avoid the test.
  • This finishes the Installation. Snap Exit on the accompanying window that affirms the equivalent.

Canon Pixma MX490 Driver and Manual Download

The driver is required for setting up an association between the Canon MX490 printer and your Mac or Windows framework. You can get the freshest variant of the driver for your Canon printer from this page. Likewise, the PDF duplicate of the Canon Pixma MX490 manual is accessible here on this site. To get the product, click on the Driver Download button, and for the manual and select the Manual Download button.

Driver Download

  • Guarantee that the Canon Pixma MX490 Setup is in the Active state.
  • Power Off the Canon gadget and afterward detach the power link and the USB line (whenever embedded).
  • Replug both the power and the USB strings, and afterward, check whether the filtering issue has cleared.
  • If the issue stays uncertain, restart the Windows or Mac PC and the Canon PIXMA MX490 printer.
  • Additionally, take a stab at stopping the US link to another port on your framework.
  • Determine that the MP programming is introduced on your Mac or Windows gadget.
  • If the driver isn't accessible on your PC, introduce the most recent MP drivers for your Canon MX490 printer from this site.
  • Affirm that your Canon PIXMA MX490 printer is picked on the Applications window.

Canon MX490 Printer Setup Troubleshooting

The Canon MX 490 is a printer that has a wide scope of highlights, for example, print, duplicate, fax, and output. The basic issues that are glanced at my clients while utilizing the Canon gadget incorporate appliances not controlling on, printing doesn't begin, no paper error, paper jam, fax errors, etc.

Canon IJ Setup MX490 Printer Not Printing

At the point when the Canon MX 490 doesn't print, you can follow the rules referenced underneath to determine the issue.

  • Check whether the Canon gadget's force LED is flickering. Stand by until it stops to allow the printer to instate.
  • Interface the Canon MX 490 straightforwardly to the PC's USB port if there is a USB center association utilized.
  • Ensure that the Canon gadget's paper yield plate is open.
  • Erase superfluous or idle print occupations if there are any, from the PC.
  • You can uninstall the Canon driver on your PC and introduce the MP driver from the Canon driver establishment CD or download it from this website.

Canon MX490 Wireless Setup

Beneath given strategies will assist you with interfacing the printer to the PC remotely utilizing a switch and without utilizing a switch.

  • Start the interaction by checking if the Canon printer is turned on.
  • Tap the Setup catch and utilize the bolt keys to choose the Wireless LAN Setup choice.
  • Press OK. The Canon Pixma MX490 Setup will begin looking for accessible organizations.
  • Go to your wireless switch and press the WPS button. Hold it for a couple of moments.
  • Select the OK alternative when the Connected Press OK message shows up.
  • Press the Copy button, and the remote arrangement will be finished.
  • Allot a print occupation to the Canon MX490 printer and check the association.

Wireless Connection Without Wireless Router In Canon MX490

  • Explore the Settings alternative and select the Device Settings choice.
  • Pick the LAN Settings alternative followed by the Change LAN choice.
  • Select the Access Point Mode alternative on the following screen. Tap SSID.
  • Press the Back snap after checking the SSID Information.
  • The following stage is to set a Security Protocol and confirm the secret phrase.
  • Start the arrangement cycle by squeezing the Start Setup alternative.
  • Go to the PC and right-click on the Wireless symbol. Pick the View Available Wireless Networks alternative.
  • Pick a wireless organization of your decision and determine the Network Key. Snap the Connect alternative.
  • The wireless association cycle of the Canon Pixma MX490 Setup is currently finished.


The majority of the organization errors are settled when you use IJ Scan Utility, an application that is essential for the MP driver. On the off chance that the issues continue, you can play out a reset with the assistance of our rules and resolve them. You should reinstall Canon drivers on your PC and interface the Canon printer to your PC indeed.

Reacties (0) 

Voordat je kunt reageren moet je aangemeld zijn. Login of maak een gratis account aan.