Dell Precision T7910 PSU 1300W replacement model H1300EF-02

Door Batterus123 gepubliceerd op Wednesday 13 November 06:55

Maximum transmission power supply replacement - Dell H1300EF-02 pc power supply 1300W. H1300EF-02 power supplies are compatible with Dell Precision T7910 Workstation. Shopping H1300EF-02 pc power online, more discount and money-saving. Check your Dell output power and voltage(Ref 80Plus) before you order H1300EF-02 pc PSU service. Cost-effective computer power supply charging replacement, please visit www.batteryclub.org for more information.

p_GSB408.jpg

  • Brand : Dell power supply

  •  

  • Input Voltage : 100-240V~/14A MAX /50-60Hz

  • Ouput Volatge : 1300W AT AC OM[IT 180.0-240V~

  •  

H1300EF-02 replacement model:

H1300EF-02 D1K3E003L T31JM V5K16

Compatiblet with Dell Precision T7910 Workstation:

Dell Precision T7910 Workstation
MAX.OUTPUT POWER:1000W AT AC INPUT 100-107V
MAX.OUTPUT POWER:1100W AT INPUT 107.1-180V ~
MAX.OUTPUT POWER:1300W AT AC OM[IT 180.0-240V~
MAX.OUTPUT POWER 1300W
UP/N:D1K3E003L
DP/N:T31JM V5K16

 

https://www.batteryclub.org/Goods/DEL17988_SE-H1300EF-02-Dell-Adapter.html

 

How to maintain Dell H1300EF-02 computer power supply

1. Remove the fan. Disconnect the main power supply first, and unplug the input and output cables on the back of the power supply. Next, unplug and connect all the accessories connected to the power supply, remove the fixing screws of the power supply box, and take out the power supply box. Observe the appearance of the power supply box, remove the screws reasonably and accurately, and remove the cover. When taking the cover, the wires should be pulled out according to the gap at the same time. Remove the four screws that secure the fan and remove the fan. You can not solder the two power cables temporarily.
2. Clean the dust. After separating the power supply board and the fan with cardboard, use a small brush or a damp cloth to wipe the dust and wipe it clean. It is also possible to use dust from the fan to blow fan blades and bearings.
3. Add lubricant. Peel off the sticker and use a needle-nose pliers to pick out the rubber seal. Find the motor bearing, add lubricant, and when you use the fan to move the fan, make the lubricant flow evenly along the bearing, then add a few drops. Pay attention to whether the fan of the ball bearing has two bearings. Don't neglect the oil feeding to the bearing on the wind side. The oil can't be placed on the main shaft only. Lubricating oils must use computer-specific lubricants or advanced lightweight sewing machine oils. Never use the lubricants used in automobiles. Finally, install the rubber sealing sheet and label it.

Here, we provide other products for your reference:

Charging adapters & Power supplies

HP PCG007 100-240V~,50-60Hz 4.0A 310W +12.0Vmain==16A +12Vcpu ==16A

LG EAY65249101 100-240V 50/60Hz(for worldwid) 19V 2.53A 48W

LG 140W 100 - 240V, 50/60 Hz, 2.0A 19V

HP 0957-2286 AC100-240V 50/60HZ 300mA DC30V 333mA 10W

Dell GJXN1 100-240V-/ 8A, 50-60Hz 460W; +12VA==/18A +12VB==/16A +12VC==/8A +5V==/25A +3.3V==/17A +5Vaux==/3A

Asus ADP-120MH_D AC 100V - 240V 2A 50-60Hz(for worldwide use) 19V--6.32A(19.5V 6.15A/6.3A), 120W

ASUS ADP-90YD_B 100-240V 50- 60Hz 19V

other products

Dell D460AM-03 100-240V-/ 8A, 50-60Hz 460W; +12VA==/18A +12VB==/16A +12VC==/8A +5V==/25A +3.3V==/17A +5Vaux==/3A

Dell 517133-001 100 - 240V

Dell H240AM-02 100-240V~/4A 50-60 Hz

Dell L350AM-00 100-240V~/5A 50-60 Hz 350W

Dell GJXN1 100-240V-/ 8A, 50-60Hz 460W; +12VA==/18A +12VB==/16A +12VC==/8A +5V==/25A +3.3V==/17A +5Vaux==/3A

Dell T128K 100-240V

Dell RM112 100 - 240V

Dell HCWV2 100-240V ~/ 4.6A, 50-60Hz

 

Reacties (0) 

Voordat je kunt reageren moet je aangemeld zijn. Login of maak een gratis account aan.