Adapter for DELL OPX 9020 7020 3020 XE2 T1700 Tower 290W Power Supply

Door Chery gepubliceerd op Friday 27 September 09:42

Buy New Replacement H290AM-00 adapter, Power Cord included. Works for DELL OPX 9020 7020 3020 XE2 T1700 Tower 290W Power Supply and many more. Warranty & Fast Shipping. We are the real manufacturer for DELL H290AM-00 adapter ,and we believe that our products are your best choose.

GSB251.jpg
  • Brand : DELL
  • Alternate with the following models : H290AM-00
  • Cell technology : GSB251
  • Capacity : 50Hz-60Hz 290W
  • Voltage : 100-127V ~ / 6A - 220V-240V ~ / 3A
  • Encoding : DEL17302_Se

Online Store:

Maintenance and instructions for the DELL H290AM-00 adapter:

1. Wiring is exposed. If the cable is worn in any way, this may result in some internal cable exposure. If the cable is severely worn and the cable is exposed, the adapter should be stopped.

The cable is broken. A cable break may occur in the flexible connector near the adapter module or connector. These flexible joints are used to bend the cable when the adapter module is wound, but may become brittle over time, causing breakage. If the cable hits the edge of an object such as a table or stool, it may also break.

2. The stitches are bent or broken. If the computer port is not properly inserted, the adapter pins may bend or break completely. Unplugging or inserting the cable at an angle may cause the center pin of the adapter to bend. If this happens frequently, the pins may break and the adapter will stop working.

3. The cable is loose. If your cable is loose, try unplugging the cable and reconnecting it to make sure it is in place. If the cable is still loose, check for broken or broken pins or connectors or cables. If the cable is damaged and it is loose, you must replace the adapter or cable.

4. The cable is worn. Cable wear is most likely to occur at either end of the cable connecting the adapter module to the connector that connects to the computer. This may be due to the number of times the cable wraps around the adapter module or the cable is subjected to any unnecessary stress.

You may also want to see this battery

Reacties (0) 

Voordat je kunt reageren moet je aangemeld zijn. Login of maak een gratis account aan.