Motorola SPN5632B adapter Replacement

Door Chery gepubliceerd op Friday 16 August 09:49

Buy New Replacement Motorola SPN5632B adapter, Power Cord included. Works for Motorola Xoom 1 Tablet and many more. Warranty & Fast Shipping. We are the real manufacturer for Motorola SPN5632B adapter ,and we believe that our products are your best choose.

  • Brand : Motorola Adapter
  • Type : GSB259
  • Capacity : 100-240V 0.6A 50-60Hz
  • Voltage : 12V
  • Encoding : MOT17348

SPN5632B Alternate with the following models:

SPN5633A SPN5632B FMP5632A E199967 FMP5630A 11119-0838738-A-B SAA101435EA

The product Motorola SPN5632B is perfectly compatible with the product model Motorola Xoom 1 Tablet :

Motorola Xoom 1 Tablet (1st Generation, MZ600 MZ601 MZ603 MZ604 MZ605 MZ606) and Atrix HD Multimedia Dock

Maintenance and instructions for the Motorola SPN5632B adapter:

1. Wiring is exposed. If the cable is worn in any way, this may result in some internal cable exposure. If the cable is severely worn and the cable is exposed, the adapter should be stopped.
2. The cable is broken. A cable break may occur in the flexible connector near the adapter module or connector. These flexible joints are used to bend the cable when the adapter module is wound, but may become brittle over time, causing breakage. If the cable hits the edge of an object such as a table or stool, it may also break.
3. The stitches are bent or broken. If the computer port is not properly inserted, the adapter pins may bend or break completely. Unplugging or inserting the cable at an angle may cause the center pin of the adapter to bend. If this happens frequently, the pins may break and the adapter will stop working.
4. The cable is loose. If your cable is loose, try unplugging the cable and reconnecting it to make sure it is in place. If the cable is still loose, check for broken or broken pins or connectors or cables. If the cable is damaged and it is loose, you must replace the adapter or cable.
5. The cable is worn. Cable wear is most likely to occur at either end of the cable connecting the adapter module to the connector that connects to the computer. This may be due to the number of times the cable wraps around the adapter module or the cable is subjected to any unnecessary stress.

You may also want to see this adapter:

Reacties (0) 

Voordat je kunt reageren moet je aangemeld zijn. Login of maak een gratis account aan.