LG DA-65G19 adapter Replacement

Door Chery gepubliceerd op Monday 12 August 09:52

Buy New Replacement LG DA-65G19 adapter, Power Cord included. Works for 6.5 x 4.4mm LG X-note C500 R410 and many more. Warranty & Fast Shipping. We are the real manufacturer for LG DA-65G19 adapter ,and we believe that our products are your best choose.

GSB309_BL.jpg
  • Brand : LG Adapter
  • Type : GSB309-BL
  • Capacity : 100-240V 50-60Hz
  • Voltage : 19V
  • Encoding : LGS17238_BL

DA-65G19 Alternate with the following models:

DA-65G19 PSAB-L101A DA-48F19 DA-48F19 LCAP35 PA-1650-43 PA-1650-64 32MB24

The product LG DA-65G19 is perfectly compatible with the product model 6.5 x 4.4mm LG X-note C500 R410 :

LG X-note C500 R410
LG Innotek PSAB-L101A
GSB309_BL_1.jpg
GSB309_BL_2.jpg

 

http://pc-laptop.co/lg-power_supply-DA-65G19-p179096.htm

Maintenance and instructions for the LG DA-65G19 adapter:

1. Wiring is exposed. If the cable is worn in any way, this may result in some internal cable exposure. If the cable is severely worn and the cable is exposed, the adapter should be stopped.
2. The cable is broken. A cable break may occur in the flexible connector near the adapter module or connector. These flexible joints are used to bend the cable when the adapter module is wound, but may become brittle over time, causing breakage. If the cable hits the edge of an object such as a table or stool, it may also break.
3. The stitches are bent or broken. If the computer port is not properly inserted, the adapter pins may bend or break completely. Unplugging or inserting the cable at an angle may cause the center pin of the adapter to bend. If this happens frequently, the pins may break and the adapter will stop working.
4. The cable is loose. If your cable is loose, try unplugging the cable and reconnecting it to make sure it is in place. If the cable is still loose, check for broken or broken pins or connectors or cables. If the cable is damaged and it is loose, you must replace the adapter or cable.
5. The cable is worn. Cable wear is most likely to occur at either end of the cable connecting the adapter module to the connector that connects to the computer. This may be due to the number of times the cable wraps around the adapter module or the cable is subjected to any unnecessary stress.

You may also want to see this adapter:

Reacties (0) 

Voordat je kunt reageren moet je aangemeld zijn. Login of maak een gratis account aan.