Dell D460AM-03 Power Supply replacement Dell XPS 8910 8920 8500 8700

Door Batterus123 gepubliceerd op Thursday 18 July 03:14

Buy Dell D460AM-03 POWER SUPPLY 100-240V-/ 8A, 50-60Hz 460W; +12VA==/18A +12VB==/16A +12VC==/8A +5V==/25A +3.3V==/17A +5Vaux==/3A for Dell XPS 8910 8920 8500 8700. 100% compatible, quality guaranteed. 1-year warranty, 30-days money-back.

p_GSB3952-1_1.jpg
  • Brand : Dell power supply
  •  
  • Input Voltage : 460W; +12VA==/18A +12VB==/16A +12VC==/8A +5V==/25A +3.3V==/17A +5Vaux==/3A
  • Out Voltage : 100-240V-/ 8A, 50-60Hz
  •  

D460AM-03 replacement model:

D460AM-01 D460AM-02 D460AM-03 AC460AM-01 AC460AD-01 HU460AD-01 HU460AM-00 PC9004 DPS-460DB-4_A

Compatiblet with Dell XPS 8910 8920 8500 8700:

DP/N: FVGCW HMCPC GJXN1 DM1RW RH8P5 6GPR9 6GXM0 7YC7C DGX9R WC1T4
DELL Insprion 5675 5680
DELL XPS 8100 8300 8500 8700 8910 8920 8930
Dell Alienware Aurora R5 R6 R7
Connector:
1 X Notebook mini drive Mini-SATA interface
4 X SATA,
1 X 24PIN
1 X 4PIN
1 X graphics 6PIN
1 X 8PIN

 

https://www.batteryclub.org/Goods/DEL17866_SE_2-D460AM-03-Dell-Adapter.html

 

 

How to maintain Dell D460AM-03 computer power supply

1. Remove the fan. Disconnect the main power supply first, and unplug the input and output cables on the back of the power supply. Next, unplug and connect all the accessories connected to the power supply, remove the fixing screws of the power supply box, and take out the power supply box. Observe the appearance of the power supply box, remove the screws reasonably and accurately, and remove the cover. When taking the cover, the wires should be pulled out according to the gap at the same time. Remove the four screws that secure the fan and remove the fan. You can not solder the two power cables temporarily.
2. Clean the dust. After separating the power supply board and the fan with cardboard, use a small brush or a damp cloth to wipe the dust and wipe it clean. It is also possible to use dust from the fan to blow fan blades and bearings.
3. Add lubricant. Peel off the sticker and use a needle-nose pliers to pick out the rubber seal. Find the motor bearing, add lubricant, and when you use the fan to move the fan, make the lubricant flow evenly along the bearing, then add a few drops. Pay attention to whether the fan of the ball bearing has two bearings. Don't neglect the oil feeding to the bearing on the wind side. The oil can't be placed on the main shaft only. Lubricating oils must use computer-specific lubricants or advanced lightweight sewing machine oils. Never use the lubricants used in automobiles. Finally, install the rubber sealing sheet and label it.

other products

Other API3FSO1 100-240V~50/60Hz 6A

DELL K350R 100-240V -12==/0.1A MAX

HP 455324-001 100-240V~ / 5.0A,50Hz-60Hz

HP 504966-001 100-240V 50-60Hz 12V

DELL H275P-01 100-127V~/6A +5V==/18A, +3.3V==/5A

Reacties (0) 

Voordat je kunt reageren moet je aangemeld zijn. Login of maak een gratis account aan.